Аксесуари
Переглянути та завантажити аксесуари PoolLab® 2.0
Аксесуари PoolLab 2.0® включають практичні інструменти, такі як змінні кювети, м'який футляр для перенесення, тримач кювет, захисний екран, кольорові мішалки, нейлонову сумку, набір референтних значень, рівень води, шприц з фільтром та інструменти для тестування на нітрати. Ці аксесуари підвищують точність вимірювань, запобігають забрудненню та забезпечують безпечне зберігання і транспортування.
Завантажити наші флаєри з аксесуарами різними мовами
Water Leveler
#14: POL2Sp-waterLeveler
The Water Leveler is a tool to reduce the amount of water to exactly 10 ml after scooping your sample water with the PoolLab 2.0® directly. It is adviced to use the Water Leveler on a moisture resistant surface.
PoolLab 2.0® Soft Case
#13: POL02-BCKcase
The practical PoolLab 2.0® Soft Case allows you to store and carry around your PoolLab 2.0® and have everything you need neatly organized while doing so.
Filter Papers
#12: PLSp-FiltGFC
The filter papers are inserted in the filter paper adapter and filter out-coming water to remove small particles.
Filter Paper Adapter
#11: PLSp-Filtad1
The filter papers are inserted in the filter paper adapter and filter out-coming water to remove small particles.
Luer Lock Syringe
#10: PLSp-InjFil-1
The luer lock syringe is used to take sample water and has the ability to screw an filter paper adapter to the tip. The scale shows the amount of water in ml and oz.
Nitrate Test Shaker
#9: FW25-shaker
The Nitrate Test Shaker is required in order to perform a nitrate measurement.
PoolLab 2.0® Reference Kit
#8: POL2Sp-refkit
The PoolLab 2.0® Reference Kit contains cuvettes filled with coloured resin for pre‑defined values of Free Chlorine LR/HR, CYA, pH, Total Alkalinity, Phosphate HR and ZERO.
Based on the measurement values of these cuvettes you can adjust your PoolLab 2.0® to match the reference values.
Nylon Bag
#7: POL2Sp-bag
The PoolLab 2.0® can easily be stored and transported in the nylon bag which prevents any parts from going missing and protects them and the PoolLab 2.0® from outside moisture.
Red Stirring Rod
#6: POL2Sp-strR
To prevent cross contamination when performing parallel measurements, 3 different coloured stirring rods are provided with the PoolLab 2.0®. If one is missing it is advised to replace the according stirring rod.
Blue Stirring Rod
#5: POL2Sp-strB
To prevent cross contamination when performing parallel measurements, 3 different coloured stirring rods are provided with the PoolLab 2.0®. If one is missing it is advised to replace the according stirring rod.
White Stirring Rod
#4: POL2Sp-str
To prevent cross contamination when performing parallel measurements, 3 different coloured stirring rods are provided with the PoolLab 2.0®. If one is missing it is advised to replace the according stirring rod.
Cuvette Holder
#3: POL2Sp-cuvhold
To secure the correct positioning of the cuvette, it is hold in place by the cuvette holder. It also ensures that the light shield is protecting the measuring chambers from any stray light.
Light Shield
#2: POL2Sp-ls
The light shield is necessary for any measurement because without it every measured value will be false.
Змінна кювета PoolLab 2.0
#1: POL2Sp-kv
A damaged cuvette can lead to incorrect measurements and therefore should not be used. If you notice any damages like scratches or cracks, please replace the cuvette as described in the "Device" manual.